|
|
| |  |  |
The GreenStar Live Update is a desktop software application that will help you make sure your GreenStar (GS) display always has the latest software from John Deere ISG. To install GS Live Update, click on the link below, and follow the on-screen prompts.
Once installed, it will alert you when new GreenStar software updates are available, and walk you through the downloading process.
IMPORTANT:
To ensure that your GS display will update successfully, please verify that your display currently has the following software version installed:
GS3 2630 - version 3.4.1338 or newer
GS2 2600 / 2100 – version 2.8.1029 or newer
GS2 1800 – version 2.8.1205 or newer
If the software version is a smaller number, please contact your dealer. To determine the currently installed software version, select Menu » Display » Diagnostics » About and reference the Application Software Build number.
IMPORTANT:
Before starting the update, please unplug ALL implements from the ISOBUS- (or implement-) connector at the back of the tractor.
The only implements currently updated via GS LiveUpdate are:
- GS2 Rate Controller
- iSteer Controller
- SeedStar II
- Air Cart
If you need to update one of the above listed implements/controllers, leave it connected to the ISOBUS socket.
N-Sensing activation procedure
For a N-Sensing activation please contact your local John Deere dealer.
Information for dealer
Please follow the steps below:
- Save a copy of the files from your flash card to your PC, and make sure all files are downloaded to your desktop software.
- Run the GS Live Update to copy the update to the flash card / USB device.
- Insert the DataCard / USB device into the display and follow the instructions on the screen.
Software Versions
You will find an overview of the latest Software Versions in the Release Notes document.
Software Update Archive
Adobe Reader is required to view files in PDF format. This application can be downloaded from the Adobe website www.adobe.com
|
|
|
|
